The G123-814-001 Dual PWM Amplifier is used to drive both
coils of a three position 24V solenoid operated proportional
valve. It is specifically intended for use in low end closed loop
applications.
It allows a very low cost proportional valve to be
used where normally a much more expensive servovalve would
be needed. Coupling it with its companion servoamplifier, the
G122-824, and a proportional valve, produces an economical
closed loop solution.
An amplifier input signal of ±10V is converted to proportional
pulse width modulated (PWM) output currents. An input of
0 to +10V delivers a proportional 0 to 1 Amp current to coil A
and a 0 to –10V input delivers a proportional 0 to 1 Amp
current to coil B.
A fixed deadband compensation circuit compensates for
spool overlap, making the amplifier suitable for closed loop
applications. Adjustable dither level and output current zero
adjustment are provided.
The user friendly front panel provides trimpots for dither
and zero level adjustment. A dual colour LED indicates the
magnitude and polarity of the command signal and two single
colour LEDs indicate the magnitude of each of the coil
currents. Two unused screw terminals on the housing double
as test points for the coil current. 0 to –10V indicates 0 to
100% coil current.
The amplifier is housed in a compact DIN rail mounting
enclosure and requires a +24V power supply.
Manual Detalhado do Produto |