Depend on our flow control valves to give just the right flow — constantly.
We offer flow and pressure capabilities of 15-340 l/min [4-90 US gal/min] and up to 450 bar [6,500 psi], respectively.
For more detailed technical information, view our
Needle Valves
 |
| Needle Valves Example Schematic |
|
- Fully adjustable, non-compensated flow control.
- Non-compensated manual flow control for an actuator or for bleeding oil from the circuit.
- Available with integral free reverse flow check.
- Flow range: 10-380 l/min [3-100 US gal/min].
- Pressure capability up to 315 bar [4,500 psi].
|
Restrictive Flow Control Pressure-Compensated
 |
| Restrictive Flow Control Pressure-Compensated Example Schematic |
|
- Two-ported design for a constant flow rate, regardless of load pressure changes.
- Commonly used for meter-in or meter-out circuits to control actuator speeds, for example in load-lowering applications.
- Bi-directional version available, allowing compensation in both flow directions.
- Flow range: 15-190 l/min [4-50 US gal/min].
- Pressure capability up to 315 bar [4,500 psi].
|
Bypass Flow Control Pressure-Compensated
 |
| Bypass Flow Control Pressure-Compensated Example Schematic |
|
- Three-ported design for a constant flow rate to the priority port, regardless of load pressure changes. Remaining flow is directed to the third port.
- Commonly used to direct fixed flow to a priority function or circuit, while making secondary flow available to other intermittent functions or the tank.
- Flow range: 23-100 l/min [6-26 US gal/min].
- Pressure capability up to 315 bar [4,500 psi].
|
Flow Divider/Combiners
 |
| Flow Divider/Combiners Example Schematic |
|
- Pressure compensated valves that combine and divide flow at a predetermined ratio.
- Commonly used for combining (forward) and dividing (reverse) flow to hydraulic wheel motors or synchronizing cylinder motion.
- Flow range: 45-340 l/min [23-90 US gal/min].
- Pressure capability up to 450 bar [6,500 psi].
|
Velocity Fuses
 |
| Velocity Fuses Example Schemati |
|
- Type of sequence valve that uses a remote pressure signal to unload a circuit.
- Commonly used for unloading an accumulator charging circuit or unloading a pump to tank at minimum pressure.
- Flow range: 4-160 l/min [1-42 US gal/min].
- Pressure capability up to 350 bar [5,080 psi].
|
|
 |